Orange Reflective Tape Type 2 Super Engineer Grade 1" 2" 4" 6" Nikkalite Safety SEG

Orange Type 2 Reflective Tape

SUPER-ENGINEER GRADE REFLECTIVE TAPE (SEG) is 60% to 100% brighter than regular engineering grade reflective tape. Great for smooth flat or smooth round surfaces like pipes, bollards, and bar gates. SEG is a Type II retro-reflective adhesive tape that is approximately 5.5 mil and has a permanent acrylic adhesive with a peel-off backing. It utilizes embedded microscopic glass beadlets to reflect light and is commonly used for reflective striping or markings on vehicles, bicycles, wheelchairs, bollards, & stock gates. It meets ASTM specifications D 4956 and LS-300C is resistant to weathering and fading and has 12-year minimum longevity.

On vehicles, it is best applied using a soapy water solution (or Windex) and a squeegee. For best results, the adhesive should be allowed to cure for about 48 hours.

This is a Nikkalite product and is stamped with a stat watermark to show that it is super engineer grade and not regular engineer grade (which is not nearly as bright).

Sold in 1, 2, 4 and 6-inch widths. 10, 20, or 30-foot lengths.

ASTM D4956 Type 2 Reflective Tape.
Single-layer design meaning it will not delaminate like other reflective tapes.
Rated for a 12-year outdoor life.
Visible for thousands of feet away versus hundreds with standard reflective tapes.
Very aggressive adhesive. Peel, stick, and press on with a soft cloth. (Clean dry smooth surface)
Used to mark emergency vehicles, fire trucks, ambulances, helmets, loading dock areas, bollards, poles, dumpsters, gates, barricades, tractor-trailers, and more.